Shot Blasting Machine
SBBE hanger type shot blasting machines are specially designed chambers of sturdy in steel fabrication and easy for maintenance to highly efficient cleaning of castings in single pass in an economical way.
The components are blasted clean using the hanger type shot blasting machines. The components are loaded inside the machine by opening the doors of it and mounting on it, the blast wheel is operated after closing the door. Blast Wheel Stations are present around the cabinet fire cleansers on circling components they are two in number, post to the cleaning, the system is shut down and the components are unloaded.
|Impellar Wheel||1 x 380||2 x 300||2 x 380||3 x 380||3 x 380|
|Cabin Size||1250 x 1350 x 1400||1250 x 1350 x 1400||1500 x 1800 x 1900||1900 x 2250 x 2400||2550 x 2800 x 3000|
|Load Carrying Capacity||250 to 300 Kgs||250 to 300 Kgs||500 to 1000 Kgs||1000 to 1500 Kgs||2500 Kgs|
|Impellar Horse Power||1 x 10 H.P||2 x 7.5 H.P||2 x 15 H.P||3 x 20 H.P||3 x 20 H.P|
|Maximum length of Parts can be cleaned (A)||900 mm||1000 mm||1350 mm||1800 mm||2200 mm|
|Diameter of Job turning circle (B)||900 mm||900 mm||1200 mm||1500 mm||1800 mm|
|Cycle Time (minute)||5||5||5 – 7||7 – 10||7 – 10|
|Shot flow per minute||1 x 16 Kgs||2 x 120 Kgs||2 x 280 Kgs||3 x 360 Kgs||3 x 360 Kgs|
|Total horse power required||18 H.P||23 H.P||45 H.P||85 H.P||95 H.P|
|Total height of the M/C above the ground level (D)||3900 mm||4100 mm||4300 mm||5200 mm||5600 mm|
|Height Below the ground level (D)||150 mm||150 mm||2150 mm||2400 mm||2900 mm|
|Through put Tonnes / Hour||0-5 – 1.5||1-0 – 2.0||1-5 – 3.0||3-0 – 6.0||5.0 – 8.0|