Sand Cooler

SBBE makes the fluidized bed type sand cooler which ensures the effective cooling of sand through double effect both by water and air cooling, during the process the sand is also cooled for reoperation. Soon after the vibratory feed the sand found would be in high temperature. The sand to metal and the holding time of the metal inside the mould determines the amount of heat that is to be removed. Cooled sand is necessary for a perfect and clean casting surface. After the process of cooling i.e. after the sand has been allowed inside the cooler and once the process is over the temperature of the sand becomes half, (from 200oC to 100oC).

The uniform flow for the sand to get cooled is achieved by the belt from the surge
hopper which has to be maintained between maximum and minimum level where
the hot sand is ported into the cooling conveyor. Air and Water are sprayed
through the nozzles present above the conveyor; the vibrations help the sand mix
well, which in turn cools the sand.

Capacity: 3 Ton to Ton/Hour

Standard Models

MODEL SBBE – CL15 SBBE – CL10 SBBE – VCL15 SBBE – VCL20 SBBE – VCL40
Capacity Tons / hour 6 10 15 20 30 – 40
Drive Power Kw - - 2 x 2 4 x 2 4.9 x 2
Size Length Width 3000 x 1050 4000 x 1050 4000 x 950 5000 x 950 5000 x 1050
Fluidisation Fan Power (Kw) 11
18.5
11 15 18.5

SRI BALABALAJI EQUIPMENTS
2/16-A,Bettathapuram Pudur,
Karamadai Post,
Coimbatore - 641 104,India
Fax : 04254 - 275154
Phone : 04254 273154
Mobile: 94433 73254,98422 73154